36
Installation and Operation:
Q.
How do I connect to Wi-Fi?
Detailed instructions are available on Page 19 of the Manual or the OnGuard Smart Tutorial Video.
Q.
Does the unit use battery power when connected tow Wi-Fi?
Battery power is not suggested when the OnGuard Smart is connected to a network by Wi-Fi or cable
due to power consumption. Power Over Ethernet (POE) is suggested for directed connections and
24v DC is suggest when Wi-Fi is used
.
Q.
How do I connect to the facility Distributed Control System (DCS).
Detailed instructions are available on Page 28 of the Manual or the OnGuard Smart Tutorial Video.
Q.
Is this unit compatible with standard building systems protocols (BACNet, Modbus, etc.)?
Communication with the OnGuard Smart is currently only available through a Distributed Control
System using analog (4-20 mA) connection.
Q.
How do I view the data in the logger?
Connect to the OnGuard Smart and go to the Logger Tab. Detailed instructions are available on
page 23 of the manual
.
Q.
How do I set up email alerts?
Connect to the OnGuard Smart and go to the Network Tap. Detailed instructions are available on
page 25 of the manual.
Q.
What is the ideal location to place the monitor?
The OnGuard Smart should be located near the most critical equipment in the control room.
Q.
Can I export the data in the logger? If so, how?
Connect to the OnGuard Smart and go to the Logger Tab. Detailed instructions are available on
page 23 of the manual
.
