19.
• Wait for the USER display and 0.0kg (0.0lb/st) to stop flashing.
• Stand on the contact surfaces( 1) of the scales with both feet.
• Firstly your weight will flash on the display.
• After a few seconds, the following results will be shown:
- the body fat content in%(FAT symbol)
- the body water content in %(TBW symbol)
- the results analysis in the form of a bar
- the muscle mass content in %(MUS symbol)
- the bone mass content in %(BON symbol)
- the calorie requirement per day
- the present gender
- the present type
- the present height
- the present age(AGE)
DISPLAY ERROR MESSAGE
If an error message appears on the display, wait until the device
is turned off. Turn it on again to restart the operation. If the error
display has not disappeared, take the batteries out of the battery
compartment for 10 seconds.
• Clean the device with a slightly moist cloth.make sure that no hu
-
midity or waters seeps into the device.
• Use a commercially sold detergent or soap for cleaning.
• Dry the device well after cleaning with a dry and soft cloth.
8888
Self test (when switching on) to check that
the numeric display functions properly
las funciones del display.
----
The scale stands faultily.
Lo
Low battery.
Err
The percentage of body fat content lies
above or below the limits of the scale.
EEEE
The weight lies above the allowed
maximum weight.
