New Outlook Welder-MIG/MAG Series
4
FUNCTION DETAIL DESCRIPTION
1.Function button description
1)ARC/MIG/single pulse/double pulse function switch button
The working mode of the welder can be switched. When the button is pressed multiple times, the working mode of the welder can be cyclically switched,
and the corresponding status indicator can indicate the current working mode of the welder.
2)2T/4T/special 4T/spot welding function switch button
①Press and hold the torch switch welder in the 2T state, and release the torch switch welder to stop working, generally used for short seam welding and
spot welding.
②Pressing the torch switch welder in the 4T state, the welding current and welding voltage are not controlled, and the torch switch is released to
continue welding. The welding current welding voltage is controlled, and the torch switch welder is pressed again to continue welding. The arc current and
the arc voltage are controlled, and the torch switch is released again, and the welding machine stops welding. It is suitable for long-slit long-distance
welding, and the corresponding indicator lights when the state is switched.
3)Wire checking function button
In the MIG state, when the wire check function button is pressed, the wire feeder is in the state of wire detection, the wire is fed quickly, the corresponding
status indicator lights up, and when the button is released, the wire is stopped.
4)Aluminum silicon/aluminum magnesium/stainless steel/carbon steel material selection button
Pressing the button,then you can select different welding wire material 5)Welding voltage / arc voltage / arc force / back burn time selection button
Press the button several times in the non-welding state to select the current adjustable parameter, and the corresponding indicator is on. Voltage
adjustment knob
Adjust the parameter value and the set value of the parameter is displayed in the voltmeter. The voltmeter in the welding state shows the actual output
voltage of the welder.
