Quick Start Guide
Page 3 of 14
D
Device Overview
Component Identification and Feature Nomenclature
A.
¼” NPT
Mounting Stud
B.
Wrench Flats
C.
Sealing O-Rings
D.
SIM Card Slot
E.
Cellular Antenna
F.
LED Indicator
G.
AA Battery (1 of 3)
H.
Nylon Device Cover
I.
Label with Device Identification &
Certification Information
J.
Nylon Locking Ring
Device Mounting Considerations
Predict-Plus shall be mounted as close to the thrust
bearings of the equipment as possible to ensure optimal
equipment data gathering. Predict-Plus shall be
mounted to the equipment via
the ¼” NPT Mounting
Stud,
a converter stud in the ¼” x 20 inset tap,
and/or
an accelerometer mounting accessory. Predict-Plus
shall be mounted in order that the axes of the devices
correspond with the axes of motion from the rotating
equipment. The wrench flats (B) on the side of Predict-
Plus shall be parallel to the equipment shaft. Predict-
Plus shall be mounted on the top face of the equipment
whenever possible.
E
F
A
G
H
I
J
C
Horizontal
B