INSTALLATION & INITIAL STARTUP
(CONTINUED)
IMPORTANT SAFETY WARNINGS
CONNECT TO MODEM AND ROUTER
Plug in your modem and wireless router into the receptacles on the rear panel of the UPS. Push the power
button on the front of the unit. Connected devices will now be protected by the UPS.
POWERING THE UPS
Turn on the UPS unit by pressing the power button on the front. Turn off the UPS unit by pressing the power
button again.
COLD START FUNCTION
If the UPS is off and not connected to power, it’s still possible to cold start the UPS to power connected
devices if the battery has sufficient charge.
CAUTION! NEVER connect a laser printer or scanner to the UPS unit. This may cause
damage to the unit.
TO REDUCE THE RISK OF HAZARDS THAT CAN CAUSE INJURY
OR PROPERTY DAMAGE, OBSERVE THE FOLLOWING WARNINGS:
CAUTION! To prevent the risk of fire or electric shock, install in a temperature and humidity controlled indoor area
free of conductive contaminants. (See the specifications for the acceptable temperature and humidity range.)
CAUTION! To reduce the risk of overheating the UPS, do not cover the UPS’ cooling vents and avoid exposing the
unit to direct sunlight or installing the unit near heat emitting appliances such as space heaters or furnaces.
CAUTION! Do not attach non-computer-related items, such as medical equipment, life-support equipment, microwave
ovens, irons, or vacuum cleaners to UPS.
CAUTION! Do not plug the UPS input into its own output.
CAUTION! Do not allow liquids or any foreign object to enter the UPS. Do not place beverages or any other liquid-
containing vessels on or near the unit.
CAUTION! In the event of an emergency, press the OFF button and disconnect the power cord from the AC power
supply to properly disable the UPS.
CAUTION! Do not attach a power strip or surge suppressor to the UPS.
CAUTION! Hazardous through electric shock. Also with disconnection of this unit from the mains, hazardous voltage
still may be accessible through supply from battery. The battery supply should therefore be disconnected in the plus
minus pole at the quick connectors of the battery when maintenance or service work inside the UPS is necessary.
CAUTION! Servicing of batteries should be performed or supervised by personnel knowledgeable of batteries and
the required precautions. Keep unauthorized personnel away from batteries.
CAUTION! When replacing the batteries, use the same number and type of batteries.
CAUTION! Internal battery voltage is I2VDC. Sealed, lead-acid, 6-cell battery.
CAUTION! Do not dispose of batteries in a fire. The battery may explode. Do not open or mutilate the battery or
batteries. Released electrolyte is harmful to the skin and eyes.
CAUTION! Unplug the UPS prior to cleaning and do not use liquid or spray detergent.
CAUTION! A battery can present a risk of electric shock and high short circuit current.
