ALARM MUTE BUTTON
STATUS INDICATOR REFERENCE CHART
• Silences the alarm for 24 hours
• Press and hold for 10 seconds to initiate the system test for the backup pump
Use the chart below to identify the message associated with
the color of each LED light on the PumpSpy Controller.
= Yellow
= Blinking Red
= Red
= Red/Green Alternating
MAIN PUMP
No Cycle Recorded
Main Pump Fail - Backup Pump
Activated
High Amp Draw - Jammed Pump
Excessive Run Time
BACKUP PUMP
No Cycle Recorded
Backup Pump Fail
High Amp Draw - Jammed Pump
Excessive Run Time
WATER LEVEL
High Water Alert
POWER
AC Outage
No Battery / Reverse Polarity
BATTERY
Low Battery - 25% Charge
Critical Battery - 10% Charge
No Battery / Reverse Polarity
WIFI
WiFi Setup Mode
Offline / Attempting to Connect
