Contact Tech Support:
(833) 786-7779 [email protected]
IMPORTANT!
READ ALL INSTRUCTIONS CONTAINED IN THIS MANUAL BEFORE USING THIS PRODUCT.
Save these instructions for future reference. Failure to read and follow the warnings and instructions
within this instruction manual could result in property damage, serious injury or death.
INSTALLATION AND OPERATING INSTRUCTIONS
System Solid State Pump Controller
Power Supply Requirements
120 VAC, 60 Hz,
15 AMP
Electrical Ratings
12Amps @ 120 VAC;
18 Amps @ 12 VDC
Relative Humidity
0 to 80%
Storage Temperature
0° to 70°C
Operating Temperature
0° to 50°C
SPECIFICATIONS
PumpSpy
™
PS2000UG
The PumpSpy System requires a 12V Deep Cycle Battery (not included), 40 amp/hr
minimum, 75 amp/hr or higher recommended. SLA/AGM Battery strongly recommended.
CELLULAR CONVERSION KIT
24/7 AUTOMATED REMOTE SUMP PUMP MONITORING
