
16 |
P a g e
USB Disk:
Insert the USB disk into OTG connection wire,
→
then insert the OTG connection
wire into the USB OTG port of the device. You can use the U disk when it is ready.
Do not insert and remove USB disk repeatedly in a short time, otherwise the USB disk may
be damaged.
Connecting to PC
Use the OTG supplied cable to connect to the PC via the USB port.
Connecting to Keyboard / Joystick / mice & other devices
You can connect a keyboard, mouse, or even a joystick or other input device to your device
via USB or Bluetooth and use it just as you would with a PC.
To connect more than one USB device at a time, use a powered USB hub to reduce the
drain on your device's battery.
HDMI
–
Link Pumpkin X to your TV
The Pumpkin X comes with micro-HDMI port. Simply plug one end of the cable into your
device and the other end into your TV. Once connected, what appears on the device will
also appear on the TV, so you can look at pictures and video, surf the web, use apps or play
games. Be sure to select the HDMI cable that’s compatible with your device. You will need 1
micro-HDMI to standard-HDMI cable for this.
3G Calling
3G calling is supported via external USB dongle (not included). Please follow below steps to
setup 3G calling from this tablet.
Before connecting to a 3G network, make sure you are using a 3G network card
supported by the device. This device only supports external USB 3G network card.
After installing a SIM UIM card to 3G network card, install the 3G network card on
USB OTG connection wire, and then connect to the device.
After 3G network card is connected, click Settings
→
Wireless and
network
→
More
→
Mobile network for 3G network settings.
Enable mobile network, tick Enable data traffic
→
Data roaming, then select Access
point name, select Menu and select available network for 3G network access.
General device can be used directly, but for a few devices, APN needs to be created
and network access shall be set before use.
After setting, you will be able to connect to 3G network. After connection, you will
see the 3G icon in the screen. When this 3G icon is gray, it means the system is
searching for network, and when it is blue, it means the network is successfully
connected.