Publication ERSC-1020 Rev 1.1 – April 2020
I
MPORTANT
U
SER
I
NFORMATION
ConveyLinx
ERSC
modules contain ESD (Electrostatic Discharge) sensitive parts and
components. Static control precautions are required when installing, testing, servicing or
replacing these modules. Component damage may result if ESD control procedures are
not followed. If you are not familiar with static control procedures, reference any
applicable ESD protection handbook. Basic guidelines are:
Touch a grounded object to discharge potential static
Wear an approved grounding wrist strap
Do not touch connectors or pins on component boards
Do not touch circuit components inside the equipment
Use a static-safe workstation, if available
Store the equipment in appropriate static-safe packaging when not in use
Because of the variety of uses for the products described in this publication, those
responsible for the application and use of this control equipment must satisfy themselves
that all necessary steps have been taken to assure that each application and use meets all
performance and safety requirements, including any applicable laws, regulations, codes,
and standards
