background image

3

CONNECTION CABLES

DMX Input

DMX Output

XLR mounting - socket XLR

XLR mounting - socket

1. Ground

1. Ground

2. Signal (-)

2. Signal (-)

3. Signal (+)

3. Signal (+)

Cable

International

Brown

L

Blue

N

Yellow/green

Pin

Live

Neutral
Ground

• 

DMX-512 connection / connection between fixture.

• 

3-pin XLR plugs connect the controller with the fixture or one fixture with another. 

Screened twisted pair cable should be used.

 

Note: the DMX-output of the first fixture in the DMX chain with the DMX-input of 

the next fixture. Always connect one output with the input of the next fixture until all 

fixtures are connected.

 

Maximum recommended serial data link distance: 500m (1640ft).

 

Caution: At the last fixture, the DMX-cable has to be terminated with the 

terminator. Solder a 200Ω resistor between Signal (-) and Signal (+) into a 3-pin 

XLR plug and plug it into the DMX output of the last fixture.

DMX MASTER-SLAVE MODE

 

If you are using a controller with this fixture, you can connect the DMX-output of 

the controller directly with the DMX-input of the first fixture in the DMX chain. If you 

wish to connect a DMX-controller using other XLR socket types you need to use an 

adapter cable.

DMX CONTROLLER MODE

 

Other LED lights operating as slaves will work synchronously when connected in a 

chain using DMX cables.

BUILDING A SERIAL DMX CHAIN

Summary of Contents for PLS00565







Reviews: