background image

2

SAVE THESE SAFETY INSTRUCTIONS

Thank you for purchasing our product. To assure the optimum performance, 

please read this manual carefully and keep it in a safe place for future refer-

ence.

                         

                             

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an equilat

-

eral triangle, is intended to alert the user to the presence of 

uninsulated “dangerous voltage” within the product’s enclo

-

sure that may be of sufficient magnitude to constitute a risk of 

electronic shock to persons.

The exclamation point within an equilateral triangle is in

-

tended to alert the user to the presence of important operat-

ing and maintenance (servicing) instructions in the literature 

accompanying the product.

Waste Electrical and Electronic Equipment or WEEE symbol. 

When this product reaches the end of its life, do not dispose 

with the household waste. This includes remote controls and 

batteries. See www.recycle-more.co.uk. For more details of 

how to dispose of PULSE products in an environmentally 

sound fashion, or contact  PULSE directly via www.pulse-

audio.co.uk.

CE marking is a declaration by the manufacturer that the 

product meets all the appropriate provisions of the relevant 

legislation implementing certain European Directives. 

Please take care when working with any audio equipment. If 

you are not fully aware how this unit works then it is best prac

-

tice to turn down all monitors and then turn them up slowly. If 

you are unsure on how to use any equipment seek help from 

a professional. Although your new console will not output any 

sound until you feed it signals, it has the capability to produce 

sounds which when monitored through an amplifier or headphones may dam

-

age your hearing permanently.

Summary of Contents for MX102










Reviews: