background image

3

Questions or concerns? Visit our website at www.pulsescooters.com for replacement parts and technical support, or call (866) 434-6067.

• 

Replace all worn or broken parts immediately.

• 

Ride only on flat, dry surfaces such as pavement or level ground without loose debris, such as sand, leaves, rocks or 
gravel. 

• 

To help reduce the risk of injury, adult supervision is recommended. 

• 

Rider weight does not necessarily mean a child’s size is appropriate to fit or maintain control on this scooter.

• 

A parent’s decision to allow his or her child to ride this product should be based on the child’s skill, maturity and ability. 

• 

Watch out for obstacles that could catch your wheel or force you to turn suddenly or lose control. Be careful to avoid 
pedestrians, other wheeled products (such as skaters, skateboards, scooters, bikes, etc.) and children or animals that may 
enter your path.  Never use in roadways, near motor vehicles, or on or near steep inclines or steps, swimming pools or 
other bodies of water.

ACCEPTABLE RIDING PRACTICES AND CONDITIONS

Direct parental supervision is required. Scooters are meant to be used only in controlled environments free of potential traffic 
hazards and not on public streets. Do not allow your child to ride a scooter in any areas where vehicle traffic is present. The 
child must maintain a hold on the handlebars at all times. Never allow more than one child at a time to ride the scooter. Never 
use near steps, sloped driveways, hills, roadways, alleys, or swimming pool areas. 
Do not ride a scooter in wet weather. Scooters are intended for use on solid, flat, clean and dry surfaces such as pavement 
or level ground without loose debris such as rocks or gravel. Wet, slick or uneven and rough surfaces may impair traction 
and contribute to possible accidents. Do not ride a scooter in mud, ice, puddles or water. Avoid excessive speeds that can be 
associated with downhill rides. Never risk damaging surfaces such as carpet or flooring by use of a scooter indoors. Do not ride 
at night or when visibility is impaired.

PROPER RIDING ATTIRE

Always ensure child is wearing proper protective equipment such as an approved safety helmet. A helmet maybe legally 
required by local law or regulation in your area. A child should always wear shoes, never ride barefooted or in sandals, and 
keep shoelaces tied and out of the way of the wheels.

FAILURE TO USE COMMON SENSE AND HEED THE ABOVE WARNINGS FURTHER INCREASES RISKS OF SERIOUS 

INJURY. USE AT YOUR OWN RISK AND WITH APPROPRIATE AND SERIOUS ATTENTION TO SAFE OPERATION. 

ALWAYS USE CAUTION.

WARNING: ALWAYS INSPECT THE SCOOTER PRIOR TO RIDING.

 Properly inspecting and maintaining your scooter can 

reduce the risk of injury. Always inspect your scooter before riding and maintain it.

WARNING: CHECK LOCAL LAWS REGARDING SCOOTER USE.

 Check local laws and regulations to see where and how 

you may use your Pulse Performance Products™ scooter legally. In many states and local areas scooter riders are required BY 
LAW to wear a helmet. Check local laws and regulations regarding laws governing helmet use and scooter operation in your 
area.

Summary of Contents for Krusher









Reviews: