www.pulsar.pl
PSUPS20A12CR
2
Features:
DC 13,8 V uninterruptible power supply of HD cameras
DC 12 V uninterruptible power supply of the recorder
fitting battery 2x17Ah/12 V
recorder space
wide range of mains supply ~200-240 V
built-in power factor correction system (PFC)
high efficiency 85%
16 outputs protected by 1A glass fuses for powering
cameras
12V/5A output dedicated to supply the recorder
battery charge and maintenance control
deep discharge battery protection (UVP)
battery charging current 2 A/4 A/8 A jumper selectable
(batteries 2x17Ah connect in parallel)
approximate backup time: 2h
battery output protection against short circuit
and reverse polarity connection
LED indication
the enclosure construction is compliant with the
requirements of the General Data Protection
Regulation GDPR (the possibility of installing two
locks with different codes)
protections:
SCP short-circuit protection
OLP overload protection
OVP over voltage protection
OHP overheat protection
surge protection
against sabotage
warranty
– 2 years from the production date
An example of power supply for cameras.
CONTENTS:
1. Technical description.
1.1. General description
1.2. Block diagram
1.3. Description of PSU components and connectors
1.4. Specifications
2. Installation.
2.1. Requirements
2.2. Installation procedure
3. Operating status indication.
4. Operation and use.
4.1. Overload or short circuit of the PSU output (SCP activation)
4.2. Over
load or short circuit of the recorder’s module or CCTV camera module
4.3. Battery-assisted operation
4.4. Parallel connection of batteries
4.5. Maintenance
