www.pulsar.pl HADOC8012C
GREEN POWER plus
5
W
H
D
Electrical parameters (tab. 3)
Mains supply
176÷264V AC
Current up to
1,5A@230VAC
Supply power
120W max.
Efficiency
80%
Output voltage
11V÷ 13,8V DC – buffer operation
9,5V÷ 13,8V DC – battery-assisted operation
Output current t
AMB
<30°C
8A + 0,5A battery charge - see chart 1
Output current t
AMB
=40°C
5,5A + 0,5A battery charge - see chart 1
Voltage adjustment range
12
÷14,5V DC
Ripple
150mV p-p max.
Current consumption by PSU systems
170 mA
Battery charge current
0,5A max. @ 17Ah (
± 5%)
Short-circuit protection SCP
electronic, automatic recovery
Overload protection OLP
105
÷150% of power supply, automatic recovery
Battery circuit protection SCP and reverse
polarity connection
polymer fuse
Surge protection
varistors
Overvoltage protection OVP
15,87-18,63V (automatic recovery)
Excessive discharge protection UVP
U<9,5V (
± 5%) – disconnect of connection battery
Tampering protection system:
- TAMPER
– indicating unwanted opening of the
PSU’s enclosure
- a microswitch, NC contacts (enclosure closed)
0,5A@50V DC (max.)
LED indication:
- AC diode indicating AC power status
- AUX diode indicating DC power status at
the PSU output
- BAT diode indicating battery voltage level
- red, normal status
– on, failure: off
- green, normal status
– on, failure: off
- green, normal status
– on, failure: off
Technical outputs:
- FAC; output indicating AC power failure
- FPS; output indicating DC absence/PSU failure
- FLB output indicating battery low voltage
- relay type: 1A@ 30VDC/50VAC, time lag: approx. 10s.
- OC type, 50mA max., normal status: L (0V) level,
failure: hi-Z level, time lag: 10s.
- relay type: 1A@ 30VDC/50VAC,
- OC type, 50mA max., normal status: L (0V) level,
failure: hi-Z level
- relay type: 1A@ 30VDC/50VAC,
- OC type, 50mA max., normal status: (U
BAT
>11,5V): L
(0V) level,
failure: (U
BAT
<11,5V): hi-Z level
Mechanical parameters (tab. 4)
Enclosure dimensions
285 x 297 x 80+8 [mm] (WxHxD)
Fixation
See figure 3
Fitting battery
17Ah/12V (SLA) max.
180x120x75mm (WxHxD) max
Net/gross weight
2,6kg / 2,8kg
Enclosure
Steel plate, DC01 0,7mm colour: RAL 9003
Closing
Cheese head screw x 2 (at the front), (lock assembly possible)
Connectors
Power supply:
Φ0,63-2,50 (AWG 22-10)
Outputs: Φ0,63-2,50 (AWG 22-10),
battery output BAT: 6,3F-2,5
TAMPER output: wires
Notes
The enclosure does not adjoin the assembly surface so that cables can be led.
Operation safety (tab.5)
Protection class PN-EN 60950-1:2007
I (first)
Protection grade PN-EN 60529: 2002 (U)
IP20
Electrical strength of insulation:
- between input and output circuits of the PSU (I/P-O/P)
- between input circuit and PE protection circuit (I/P-FG)
- between output circuit and PE protection circuit (O/P-FG)
3000 V/AC min.
1500 V/AC min.
500 V/AC min.
Insulation resistance:
- between input circuit and output or protection circuit
100 MΩ, 500V/DC
