Pulsar HADOC 8012C, Quick Start Manual

Page: 2 / 10

www.pulsar.pl HADOC8012C
GREEN POWER plus
2
Features:

DC
13,8V/8A uninterruptible power supply
*

fitting battery: 17Ah/12V

wide range
of mains supply: 176÷264V

high efficiency 80%

battery charging and maintenance control

excessive discharging (UVP) protection

battery charge current 0,5A

battery output full protection against short-circuit
and reverse polarity connection

LED indication

FAC technical output indicating AC power loss
– OC and relay type

FPS technical output indicating PSU failure
– OC and relay type

FLB technical output indicating battery low voltage
– OC and relay type

protections:

SCP short-circuit protection

OVP overvoltage protection

overvoltage protection

against sabotage

overload protection (OLP)

warranty
– 4 year from the production date
CONTENTS:
1. Technical description.
1.1 General description
1.2 Block diagram
1.3 Description of PSU components and connectors.
1.4 Specifications
2. Installation.
2.1 Requirements
2.2 Installation procedure
3. Operating status indication.
3.1 LED indication of operating status
3.2 Technical outputs
4. Operation and use.
4.1 Overload or short circuit of the PSU output (SCP on)
4.2
Battery-assisted operation
4.3 Maintenance
1. Technical description.
1.1 General description.
A buffer PSU is intended for uninterrupted supply to devices that require stabilised voltage of 12V DC (+/-
15%). The PSU provides voltage of U=13,8V DC with output current of I=8A + 0,5A for battery charge
*
. In case
of power decay, a battery back-up is activated immediately. The PSU is constructed based on the switch mode
PSU, with high energy efficiency. The PSU is housed in a metal enclosure (colour RAL 9003) which can
accommodate 17Ah/12V batteries. A micro switch indicates door opening (front cover).
During normal operation, the total current drawn by the equipment may not exceed I = 8A.
Maximum battery charge current: 0,5A.
Total device c battery: 8,5A max
*
.
OPTIONAL POWER SUPPLY CONFIGURATIONS:
(visualisation available at:
www.pulsar.pl)
BATTERY 17Ah:
1.
Buffer power supply
HADOC 13,8V/8x1A/17Ah.
- HADO LB8 8x1A (AWZ580 or AWZ579) + 17Ah
2. Buffer power supply HADOC 13,8V/12V/5A/17Ah.
- HADO RN500 (13,8V/12V) + 17Ah
3. Buffer power supply HADOC 13,8V/12V/4x1A/17Ah.
- HADO RN500 (13,8V/12V) + LB4x1A (AWZ575 or AWZ576) +17Ah
4. Buffer power supply HAD
OC 13,8V/5V÷7,4V/2A/17Ah.
- HADOC8
012C + DCDC20 (5V÷7,4V/2A) + 17Ah
BATTERY 7Ah:
1.
Buffer power supply
HADOC 13,8V/16x0,5A/7Ah.
- HADO 2x LB8 16x0,5A (AWZ578 or AWZ580) + 7Ah
2. Buffer power supply HPSBOC 13,8V/8x1A/7Ah.
*
Refer to chart 1