www.pulsar.pl
BNC08128C
G
REEN POWER CCTV BNC
3
1.2. Block diagram.
Figure 1. Block diagram of the PSU.
1.3. The description of components and connectors of the PSU.
Table 1.
Component No.
[Figure 2]
Description
[1], [11]
LED optical indication:
green L
IN
– indication of voltage at the IN input
red L
AC
– AC voltage indication
red L
FPS
–FPS failure indication
[2]
Connector:
IN – power supply of the module (factory setting)
AC –230V mains supply indication input
[3]
F1 ÷ F8 fuses in the AUX1 ÷ AUX8 (+), F1A circuits
[4]
Jumper to select melting fuse or PTC polymer fuse
[5]
Green LED L1 ÷ L8 – voltage indication at the AUX outputs (during normal
operation, these LEDs are on)
[6]
BNC connector of the video output to the DVR
[7]
BNC connector of the video input from the cameras
[8]
AUX1÷AUX8 – camera power supply outputs (12÷15V)
[9]
FPS – technical output indicating failure – OC type
[10]
FPS – technical output indicating failure – relay type
[12]
Optional, external optical indication connector (factory setting)
Table 1. The description of components of the BNC module.
