10
ASSEMBLY
Fig 4
Adding / Checking Engine Oil (See fig 5)
•
• Place 2 bushings on handle and slide handle in place with the pre-drilled hole on the generator frame.
Insert bolt through the handle and frame and tighten with nut.
• Repeat on opposite side.
Installing The Handles (See fig 4)
•
Place generator on a level surface.
•
Clean area around oil fill.
•
Remove oil fill cap and wipe dipstick clean.
•
Screw dipstick into filler neck. Remove dipstick and verify oil level is within safe operating range.
•
Add recommended engine oil as necessary. (See Add Engine Oil.)
•
Install oil fill cap/dipstick and hand-tighten.
Summary of Contents for G65BN
Page 23: ...DIAGRAMS 23 G65BN...
Page 46: ...DIAGRAMA 23 G65BN...
