www.pulsar.pl
DSOP24V
31
7. Remote monitoring.
The power supply is equipped with an additional Ethernet module with a 10Base-T/100Base-TX interface
to connect to the Internet. Such a configuration enables the remote monitoring of the Voice Alarm System over the
Internet from anywhere.
Fig. 24. Explanatory figure showing the remote monitoring via the INTERNET network.
The Ethernet module has a built-in powerful web server that allows remote monitoring of the current status
of the power supply in the browser of any PC computer. In addition, an automatic email alert is available. The
messages contain information about the current errors, e.g.: "No AC power", "High resistance in the battery circuit",
"AUXn fuse failure", etc., with the exact time of failure. In addition, each event contains additional information in the
form of technical parameters recorded at the time of occurrence.
Time periods between alerts and types of initiating events are individually configured by the user.
7.1. Connection configuration.
To enable remote communication with the power supply, perform a pre-configuration of the built-in Ethernet
module. This configuration can be performed after connecting the power supply to the notebook as shown below.
Fig. 25. Schematic diagram of the connection between PSU and computer.
Enter the IP address of the module in the web browser window. The default IP address is 192.168.1.100.