Pulsar Chromabatten CBAT100 Instructions Manual Download Page 8

 

 

Pulsar Light of Cambridge Limited 

?

  3 Coldhams Business Park 

?

  Norman Way 

?

  Cambridge 

?

  CB1 3LH 

?

  England 

?

  Tel: 44 (0)1223 403500 

?

  Fax: 44 (0)1223 403501 

?

  Email: [email protected] 

?

  Web: www.pulsarlight.com 

 

Read the Product Instruction Leaflet and this Safety Instructions Leaflet before attempting 
to install or operate this apparatus. 

Keep this leaflet and the Product Instruction Leaflet for future reference. 

Observe ALL warnings indicated by the 

symbol, both in the Product Instruction 

Leaflet and on the apparatus. 

Follow ALL instructions given in the Product Instruction and this Safety Leaflet.  Failure to 
do so may result in serious injury or death. 

Protect the power cord from being walked on or pinched, particularly at plugs, auxiliary 
outputs, and the point where they exit from the apparatus. 

Only use attachments/accessories specified by the manufacturer (Pulsar Light of 
Cambridge Ltd. UK). 

Use only with the stand/bracket or other mounting arrangement specified in the Product 
Instruction Leaflet.  In case of doubt, consult with the manufacturer (Pulsar Light of 
Cambridge Ltd. UK). 

Unplug this apparatus before lightning storms or when unused for long periods. 

Refer all servicing to suitably qualified service personnel.  Servicing is required when the 
apparatus has been damaged in any way, such as power supply cord or plug damaged, 
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been 
exposed to rain or moisture, does not operate normally, or has been dropped. 

DO NOT block any of the ventilation openings.  Install the apparatus as specified in the 
Instruction Leaflet. 

DO NOT defeat the safety purpose of the polarized or grounding-type plug.  A polarized plug 
has two blades with one wider than the other.  A grounding-type plug has two blades and a 
third grounding prong.  The wide blade or the third prong is for YOUR safety.  If the 
provided plug does not fit into your outlet, consult an electrician for replacement of the 
obsolete unit. 

UNLESS THIS APPARATUS HAS AN IP RATING OF 65 OR GREATER 

 

Clean only with a DRY cloth. 

 

Protect the apparatus from dripping and splashing. 

 

DO NOT place objects containing liquids on the apparatus. 

 

DO NOT use this apparatus near water or in a condensing atmosphere. 

 

Mains Supply Cable colours

 

Green/Yellow =  

Earth / Ground 

Brown = Live / Phase / Hot 

Blue = Neutral / Grounded Conductor 

 

IMPORTANT SAFETY INSTRUCTIONS 

 

Summary of Contents for Chromabatten CBAT100










Reviews: