Pulsar Axion 2 XQ35, Manual, Page: 60 / 62

Possible cause
The device is in an area with too many Wi-Fi networks that may be
causing signal interference.
Solution
To ensure a stable Wi-Fi connection, relocate the device to an area with
fewer or no Wi-Fi networks.
Possible cause
The device has a 5 GHz network enabled, but the smartphone only
supports 2.4 GHz.
Solution
Switch the device's Wi-Fi bandwidth to 2.4 GHz.
More information on solving problems with connection to Stream Vision
2 by following the
link .
Wi-Fi signal is missing or interrupted
Possible cause
Smartphone or tablet is out of range of a strong Wi-Fi signal. There are
obstacles between the device and the smartphone or tablet (e.g.,
concrete walls).
Solution
Relocate smartphone or tablet into the Wi-Fi signal line of sight.
More information on solving problems with connection to Stream Vision