Pulsar Axion 2 XQ35, Manual, Page: 47 / 62

1. Select the Stadiametric Rangefinder function with short presses of
the MENU (4) button until the icon is selected.
2. You will see on the display: measurement bars, icons of three reference
objects and respective distances for the three objects.
3. Position the lower fixed bar under the object being ranged.
4. By pressing the UP (5)/DOWN (3) buttons, move the upper horizontal
bar relative to the lower fixed bar until the object fits entirely between
the two bars. The distance to the object is automatically recalculated
as you move the upper line.
5. Exit the rangefinder mode with a long press of the MENU (4)button or
wait 10 seconds to exit automatically.
Notes:
There are three predefined values for the reference objects: Hare - 0.3
m height, Boar - 0.7 m height, Deer - 1.7 m height.
Before it appears on the display, a measured distance value is rounded
up to 5m for larger values and rounded down to 1m for smaller values.
To select the unit of measurement (Meters or Yards), go to the
General
Settings
Image not found or type unknown
menu item => Units of Measure submenu.