manualshive.com logo in svg

Pulsar Axion 2 LRF, Manual

Share
Download
Pulsar Axion 2 LRF Manual Download Page 43

Single Measurement Mode

1. Press the ON/OFF (6) button briefly to power the device on.
2. Activate the rangefinder by pressing the LRF (12) button briefly. A red 

mark appears on the display.

3. Place the rangefinder’s reticle on the target. Press the LRF (12) button 

briefly to measure the distance to the object once.

4. The measurement results are displayed in the upper right corner.
5. The rangefinder shuts down after 3 seconds of inactivity.

Scan Mode

1. Press the ON/OFF (6) button briefly to power the device on.
2. Activate the rangefinder by pressing the LRF (12) button briefly. A red 

mark appears on the display.

3. Activate the scan mode by long pressing the LRF (12) button to 

continuously measure the distance to objects.

4. The measurement results are displayed in the upper right corner.
5. Deactivate the rangefinder by long pressing the LRF (12).

Notes:

Additional rangefinder settings are available in the 

Rangefinder

section 

Summary of Contents for Axion 2 LRF





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands