Pulsar ADOC1551280, Manual

Page: 2 / 8

ww.pulsar.pl ADOC1551280
2
Features:

13,8VDC/8A uninterrupted supply
 wide range of supply voltage 88÷264VAC

high efficiency 80%

battery charge and maintenance control

deep discharge battery protection (UVP)
 battery charging current 0,5A
 battery output protection against short circuit
and reverse polarity connection

LED indication
 FAC technical output indicating AC power loss
– OC and relay type

FPS technical output indicating PSU failure
– OC and relay type

FLB technical output indicating battery low
voltage
– OC and relay type
 protections:
 SCP short-circuit protection

OVP over voltage protection

surge protection
 OLP overload protection

warranty – 5 year from the production date
CONTENTS:
1. Technical description.
1.1 General description
1.2 Block diagram
1.3 Description of PSU components and connectors
1.4 Specifications
2. Installation.
2.1 Requirements
2.2 Installation procedure
3. Operating status indication.
3.1 LED indication of operating status
3.2 Technical outputs
4. Operation and use.
4.1 Overload or short circuit of the PSU output
4.2. Battery-assisted operation
4.3. Maintenance
1. Technical description.
1.1 General description
A buffer PSU is intended for an uninterrupted supply to devices requiring stabilized voltage of 12 V DC
(+/-15%). The PSU provides voltage of 13,8V DC with current capacity I=8A + 0,5A battery charge . In case of
power decay, a battery back-up is activated immediately.
During normal operation, the total current drawn by the receivers may not exceed I=8A.
Maximum battery charging current: 0,5 A. Total device c battery: 8,5 A max.