Model 90 Quantifier Sound Level Meter
Page 33
Measurement Auto Repeat
The Auto Repeat function is used to set the instrument to make a series of contiguous
measurements. Please note that this function only operated in the Broadband
Measurement. Auto Repeat is not available during 1:1 or 1:3 Octave Band Mode.
For example, if the measurement duration was set to 15 minutes and the Auto Repeat
disabled, after one 15 minute measurement the instrument will stop and store the
measurement information the memory.
With the Auto Repeat function enabled, the instrument will make further 15 minute
measurements, one after the next until the total number of measurements has been
made. This allows the user to tell the instrument, for example, to make 96 individual 15
minute measurements over a 24 hour period.
To configure the Auto Repeat function, enter the menu and select the Measurement
Duration option and then select the Auto Repeat option.
Key Press
Display
Use the up and down arrows to change the number of measurements required and the left and right arrows
to move between the digits. Press OK to accept the changes or Exit to discard any changes made.
