www.pulsar.pl
EN54-2A17LCD
RED POWER
43
9.5.
„PowerSecurity” program.
The ”Power Security” program is available on
Its detailed description can be found in the manual.
„Power Security”
is a free computer program developed to view and analyze the information sent from the
PSU installation spots. The main panel is presented below.
Fig. 35.
“Power security” main panel.
It is possible to divide the main panel of the program into smaller areas, depending on the number of monitored
power supplies.
The program is equipped with manager mode, which allows the grouping of power supplies for easier
analysis and orientation.
The application enables both the visualization and analysis of the received data. Exceeding of the acceptable
parameters is indicated by red illumination of the appropriate area or by blinking of the indicator light. Individual
tabs allow to monitor the power supply parameters on the chart and failure memory along with the information
about the status of technical outputs and electrical parameters.
