www.pulsar.pl
EN54-2A17LCD
RED POWER
36
-
press the „SET” button, the prompt will appear at the end of the line
-
use the „<” or „>” buttons to set the required brightness
-
confirm by pressing the „SET” button
7.3.5. Contrast setting
The „Contrast” menu in the „Control panel” enables setting the contrast of the display text.
-
use the „<” or „>” buttons to display the
Contrast
menu
-
press the „SET” button, the prompt will appear at the end of the line
-
use the „<” or „>” buttons to set the contrast
-
confirm by pressing the „SET” button
7.3.6. Blinking light indicating failure
The „Blinking light indicating failure” menu enables setting the backlight mode during failure indication.
When on, the blinking light will indicate a failure.
-
use the „<” or „>” buttons to display the Blinking
light indicating failure
menu
