27000
- FRESNEL
BLACK
27002
- FRESNEL
WHITE
27100
- PEBBLE CONVEX BLACK
27102
- PEBBLE CONVEX WHITE
27050
- PROFILE ZOOM
BLACK
27052
- PROFILE ZOOM
WHITE
The
PULSAR 650W Lantern Range
gives the lighting designer
the ability to produce variable beam sizes and shapes with either a
hard or soft edge. Runners are provided to accept an optional
drop in Gobo Holder or Iris. The Profile Zoom Lantern also
contains profiling stainless steel shutter blades, and these,
together with the zoom lens system provides the operator with full
control over the beam.
MAINS SUPPLY -
240VAC
~
650W Max., 50-60Hz nominal
Ensure that the lamp voltage suits the supply voltage.
The mains cable should be protected by a fuse with a maximum
rating of 10A.
The mains cable should be fitted with a suitably approved and
rated plug.
Note: in some countries it is a requirement that such a plug be
fitted by a qualified electrician.
We recommend the use of a Residual Current Circuit Breaker.
CABLE COLOURS
Green/Yellow
=
Earth / Ground
Brown
=
Live / Phase / Hot
Blue
=
Neutral
WARNING - THIS APPLIANCE MUST BE EARTHED
A Steering Handle and a Safety Chain Fixing Point are provided
on the rear panel.
INSTALLATION
should only be carried out by
suitably skilled and competent persons.
The wearing of heat-resistant gloves when making any
adjustments is strongly advised, as the enclosure temperature of
the 650W range may be 200
O
C.
The 650W Lantern Range must be securely mounted, using the
M10 bolt, spring washer and wing nut supplied, through the hole
located in the handle.
A safety chain of suitable length and strength (Pulsar 60030/1)
must
be securely fixed between the fixing point on the rear of the
Lantern and the suspension point (mounting surface).
The 650W Lanterns generate a certain amount
of heat, the minimum distance from flammable
materials to the surface of the luminaire shall
be 0.3m.
The Fresnel/Pebble Convex (Profile Zoom)
must be a minimum distance of 0.9m (0.6m)
from lighted objects.
Colour Filters
(125mm x 125mm) may be inserted in the gel
holder provided, which in turn slots into the runners on the front of
the lantern and is retained by the spring clip.
LAMP BASE -
Type GY 9.5
SUITABLE LAMPS -
300W
- M38 (2000 hrs)
500W
- T18 (400 hrs), T25 (400 hrs), M40 (2000 hrs)
650W
- T26 (400 hrs), T27 (400 hrs)
Note:
it has been found by some of our customers that the use
of a 300W lamp for bright colours (yellow etc.) and a 500W/650W
lamp for dark colours (blue etc.) produces a more even light show,
as well as reducing total current consumption.
BACK PANEL CONNECTIONS
LAMP INFORMATION
I
N
S
T
R
U
C
T
I
O
N
S
SPECIFICATION
650W LANTERN RANGE
!
INSTALLATION AND VENTILATION
0.3m
0.90m
P U L S A R L I G H T O F C A M B R I D G E L I M I T E D
Henley Road - Cambridge - CB1 3EA - England
Tel: 44(0)1223 366798 - Fax: 44(0)1223 460708 - email [email protected]
Directors: P F Mardon MA - K Sewell MA - A D Saunders - S Mardon - T M Sewell (Belgium)
R E G I S T E R E D I N E N G L A N D 1 3 0 0 6 3 6
