CS10.241, CS10.241-S1
CS-Series
24V,
10A,
240W
S
INGLE
P
HASE
I
NPUT
Aug. 2022 / Rev. 2.1 DS-CS10.241-EN
All parameters are specified at 24V, 10A, 230Vac, 50Hz, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone +49 89 9278 0 Germany
21/27
21.
A
CCESSORIES
21.1.
ZM1.WALL
-
W
ALL
M
OUNTING
B
RACKET
This bracket is used to mount the power
supply onto a flat surface without utilizing a DIN rail.
21.2.
ZM13.SIDE
-
S
IDE
M
OUNTING
B
RACKET
This bracket is used to mount Dimension units sideways with or without utilizing a DIN rail. The two aluminum brackets and the black
plastic slider of the unit must be detached so that the steel brackets can be installed.
For sideway DIN rail mounting, the removed aluminum brackets and the black plastic slider need to be mounted on the steel bracket.
Side mounting with DIN rail brackets
Side mounting without DIN rail brackets
