Puls CPS20 Series, Manual, Page: 17 / 26

CS20.241, CS20.241-A1
C-Series
24V, 20A, S
INGLE
P
HASE
I
NPUT
Preliminary
19. A
PPROVALS
EC Declaration of Conformity The CE mark indicates conformance with the
- EMC directive 2004/108/EC,
- low-voltage directive (LVD) 2006/95/EC and
- RoHS directive 2011/65/EC.
EC Declaration of Conformity
(additional for CS20.241-A1)
pending The CE mark indicates conformance with EMC directive
2004/108/EC and the ATEX directive 94/9/EC (Equipment and
protection systems intended for use in potentially explosive
atmospheres)
IEC 60950-1
2
nd Edition,
pending
CB Scheme,
Information Technology Equipment
UL 508,
pending
IND. CONT. EQ.
Listed for use as Industrial Control Equipment;
U.S.A. (UL 508) and Canada (C22.2 No. 107-1-01);
E-File: E198865
UL 60950-1
2
nd
Edition,
pending
Recognized for use as Information Technology Equipment,
Level 5; U.S.A. (UL 60950-1) and Canada (C22.2 No. 60950-1);
E-File: E137006
ANSI / ISA 12.12.01-2007
(Class I Div 2)
pending Recognized for use in Hazardous Location Class I Div 2 T 3
Groups A,B,C,D systems; U.S.A. (ANSI / ISA 12.12.01-2007) and
Canada (C22.2 No. 213-M1987)
The unit is suitable for use in Class I Division 2 Groups A, B, C, D locations.
Substitution of components may impair suitability for Class I Division 2 environment.
Do not disconnect equipment unless power has been switched off. Wiring must be
in accordance with Class I, Division 2 wiring methods of the National Electrical Code,
NFPA 70, and in accordance with other local or national codes.
EN 60079-15
ATEX
(CS20.241-A1 only), pending
II 3G Ex nAC II T x
Suitable for use in Class 1 Zone 2 Groups IIa, IIb and IIc
locations. Number of ATEX certificate: EPS 09 ATEX 1 236 X
The power supply must be built-in in an IP54 enclosure.
Marine,
pending GL (Germanischer Lloyd) classified
Environmental category: C, EMC2
Marine and offshore applications
GOST P,
pending Certificate of Conformity for Russia and other GUS countries
20. F
ULFILLED
S
TANDARDS
EN 61558-2-17 Safety of Power Transformers
EN/IEC 60204-1 Safety of Electrical Equipment of Machines
EN/IEC 61131-2 Programmable Controllers
EN 50178, IEC 62103 Electronic Equipment in Power Installations
SEMI F47-0706 Ride-through compliance for the semiconductor industry up to 14A output current
Jan. 2012 / Rev. 0.5 DS-CS20.241-EN Preliminary
All parameters are specified at 24V, 20A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone +49 89 9278 0 Germany
16/25