background image

1.

 

Do not

 operate the vacuum cleaner too close to heaters, radiators, and other 

hot surfaces.

2.

  Before inserting the plug into the wall, make sure your hand is dry.

3.

   Before turning on the vacuum cleaner, remove any large or sharp objects from 

the floor or cleaning surface in order to prevent damage to the filter.

4.

  When you want to pull the plug from the wall, 

do not

 use the power cable, gently 

pull the plug from the power socket.

5.

  If the hose inlet or telescopic chrome tube are blocked, you should switch off the 

cleaner straight away and remove from mains power. Clear the blockage before 

attempting to start the vacuum cleaner again. 

BEFORE YOU BEGIN

This machine is equipped with a cord and plug. In the event that either of these parts get 

damaged, it must be repaired by a qualified technician.

17.

  If the air inlet, floor head or the telescopic tube 

is blocked, switch off the cleaner straight away 

and remove from the Mains power. First clear 

the blocked object before attempting to start 

the cleaner vacuum again. 

18.

  Do not leave the appliance unattended when it 

is connected to a Mains power supply.    

19.

  Before carry out any maintenance service 

or cleaning the filters, always switch off the 

vacuum cleaner and disconnect the plug from 

power supply 

20.

 Keep ends of the hose, telescopic tube and 

other openings away from your face and body.

21.

  Do not use the vacuum cleaner if it is damaged 

or breaks down. Check the electrical regularly 

for defects. If connection cables, electrical 

hoses, electrical contacts and electric tubes 

are damaged, have them replace immediately.

22.

  Never clean any of the electrical parts, 

especially the electrical connections with water 

or liquid cleaners.

23.

  Never attempt to make any modifications 

electrically to the vacuum cleaner.

24.

  Always store the appliance indoors in a cool 

and dry place.

25.

  For indoors and domestic use only 

26.

  Damage caused by improper use or by not 

observing the instructions in this manual will 

void warranty.

3

PULLMAN 15L WET & DRY JANITOR 

A-031b

Summary of Contents for A-031b













Reviews: