pullman Ermator w250, Operation Instructions Manual

Page: 11 / 24

Revision 3 10
Service
When cleaning and servicing the machine. You must switch off the machine and pull out the
plug from the outlet.
•
Avoid cleaning with high pressure cleaner. If necessary do not point at the openings on the
machine, especially the opening for the cooling air.
•
Before moving the machine from the working area, the machine must be cleaned. Furthermore
must the inlet be locked with the expanding plug attached.
•
All other equipment must be regarded contaminated and be treated thereafter.
•
If possible use a special suitable room.
•
Proper personal protective equipment must be used.
•
All parts after service, which are contaminated, must be taken core of in a proper way in plastic
bags according to all regulations.
•
If the vacuum cleaner has to be used for other purposes, it is extremely important that the vaccum
cleaner will be cleaned, to avoid spreading of hazardous dust.
Accessories
Following is parts that should be changed on a regular basis:
Part.no. Description No/machine
1337019 400-2C C-filter 1 pcs (W350)
Spare parts, see enclosed spare parts list.
Warranty
All Pullman suction devices and accessories have a 12-month factory warranty for material and
manufacturing defects. You can extend the warranty to 36 months by returning the attached warranty
slip. Do not attempt to repair the suction apparatus without the consent of the manufacturer. The
warranty does not cover defects which are the result of normal wear and tear, negligence, defective
use, unauthorised repair or the suction apparatus being connected to the incorrect voltage.
In the event of any complaint, the suction apparatus or an agreed part of it must be returned to us or
our authorised representative for warranty examination and for any warranty repair or replacement.