pullman Ermator S-Line Series, Operating Instructions Manual

Page: 2 / 44

Introduction
Dear Customer,
Thank you for choosing Pullman Ermator as your supplier.
We hope that the S-Line dust extractor will be to your satisfaction and meet your expectations.
Pullman Ermator have manufactured professional dust extractors since 1966 and has over the years
acquired a genuine technical knowledge in this area. We are continuously striving to improve our
products in our product segment and will continue to supply the market with new equipment.
Notice!
These instructions are only for S-Line Dust Extractors.
The S-Line Dust Extractors are designed to clean construction areas and be connected to small
electrical machines such as drills, grinders etc. The machine is suitable for picking up dry, non-
flammable dust and debris in and indoor environment. It is not suitable for picking up liquids.
The S-Line Dust Extractors are intended for both household and commercial use.
Pullman Ermator will not be held responsible if the dust extractor is used for other applications
or been used in ways other than those outlined in this instruction manual.
Please pay particular attention to the safety regulations.
Read the complete instruction manual before using your dust extractor.
All spare parts used with the dust extractors must be those specified by Pullman Ermator.
Table of contents
1 SAFETY INSTRUCTIONS 8 WARRANTY
2 UNPACKING 9 PROBLEM SOLVING
3 FUNCTION 10 TECHNICAL DATA
4 FILTER CLEANING 11 PLUGS
5 DUST STORAGE SYSTEM 12 DECRALATION OF CONFORMITY
6 FILTER CHANGE 13 EXPLODED VIEWS
7 SERVICE 14 CONTACT INFO