PUFF Avatar 2, Manual

Page: 44 / 96

G B
SAFETY INFORMATION
For a safer and more efficient use of the Avatar electronic cigarette
and its accessories, we advise you to read the following instructions ,
strictly observe the operative procedure indicated in this manual and
to refer to the information leaflet contained in each single packet.
TRANSPORT INSTRUCTIONS
Do not keep the Avatar electronic cigarette in your pocket. If the va -
porization device should accidentally be turned on, it would cause ir -
reparable damage.
COMPONENTS OF THE ELECTRONIC CIGARETTE
• The Avatar electronic cigarette is a highly technological product and
its components such as the cartomizer, the battery and the battery
chargers have been produced specifically for this product.
• We recommend the exclusive use of PUFF components and accessories.
• The use of components and/or accessories which are not produced
specifically for this product could cause malfunctioning and/or damage
to the product and invalidation of the guarantee.
WARNING BEFORE USE
• The Avatar electronic cigarettes leave the factory with the batteries
already charged to about 80%. Do not recharge them until the led be -
low the button starts to flash and the lateral led lights are completely
off. (See use of the Avatar electronic cigarette).
• After opening the packet, remove the Avatar battery and a carto
-
mizer.
Connect the battery to the cartomizer provided after having filled it
with Puff liquid for electronic cigarettes. Wait about 10 minutes before
starting to use the Avatar electronic cigarette.
• Using a cartomizer that is not correctly filled with the liquid will cause
immediate damage and invalidation of the guarantee.