EN
4
1
2
12
5
4
6
11
7
10
9
8
14
13
3
1.
COUNTER WEIGHT ( 7,4 Kg)
2.
FUEL TANK
3.
DIFFERENTIAL LEVER
4.
SHIFT LEVER
5.
ENGINE SWITCH
6.
CLUTCH BAIL
7.
HANDLE
8.
RESISTANCE STAKE
9.
LEVELING SHIELD
10.
SAFETY LOCK
11.
MANUAL DEPTH STAKE
12.
GAS LEVER
13.
IGNITION CORD
14.
HANDLE BAR LOCK
I - TECHNICAL SPECIFICATIONS
Machine Lenght
Machine Width
Machine Height
Dry Weight
Engine model
Engine type
Capacity
Nominal power
Acoustic pressure level
Vibration level
Fuel tank capacity
Starting system
Tire
Tyre pressure
Wheel Distance
Main cluth system
Driving sluth system
Transmission
Tiling Width
1600 mm
560 mm
1095 mm
88 Kg
EP 17
Air-cooled, 4 stroke gasoline engine
169 cm
3
3,7 Kw à 3400 tr/mn
83,5 dB (A) + 1
3,2 m/s
2
+ 0,2
3,4 L
Recoil
100/85D6
1,2 bars
300 mm
Belt tension
Differential lock
2 forward and 1 reverse, 2 working speeds
500 mm
ACCESSORIES
No accessories are required on this machine. Using accessories with this machine may make the machine
dangerous, and cause damage to your machine which will not be covered by your guarantee.
II - ASSEMBLY
The assembly can by realised by a private individual. If you meet problems during the assembly, contact
your distributor.
After taking the machine out from the carton, please assemble in the following manner.
Note :
Necessary parts for assembly are packed in the same bag as instruction manual. Parts consist fixed grip, plain
washer and bolt.
1) INSTALLING HANDLE
Loosen the nut on the plate and remove the handle to the position of reaward, and place the bar on the notch of the
handle frame.Insert the handle from the side of belt cover and fix with grip, S washer, and washer.
