46
v1_1 rev 11-22
• LAN Settings
Ŝ
IP Configuration Type
: Select whether the camera automatically configured the network
settings (DHCP) or whether you manually configure the network settings (Static).
Ŝ
IP Address
: The IP address is a unique address the network uses to connect and configure
the camera.
Ŝ
Subnet Mask
: The Subnet Mask is a set of numbers that defines how large your network
is.
Ŝ
Gateway
: The Gateway is the address associated with your router to connect to the
internet.
Ŝ
DNS Address
: The DNS address is a unique IP address the camera will query when trying
to reach a specific website.
Ŝ
MAC Address
: The MAC Address is a unique address the Ethernet port utilizes to
communicate with the network. You can not change this address.
Ŝ
DHCP Timeout
: DHCP Timeout is the amount of time the camera will try to acquire an IP
address through DHCP. After this time, the camera will revert to the Static Fallback Address
& Static Fallback Mask. You can not change this timeout.
Ŝ
Static Fallback Address
: Static Fallback Address is the IP address the camera will revert
to if one can’t be acquired automatically. You can not change this address.
Ŝ
Static Fallback Mask
: Static Fallback Mask is the Subnet Mask the camera will revert to if
one can’t be acquired automatically. You can not change this subnet mask.
• NTP Settings
Ŝ
NTP Time Sync
: Toggle Network Time Protocol (NTP) on or off.
Ŝ
NTP Time Zone
: Select your time zone.
Ŝ
Server Address
: Define the NTP Server Address you wish to utilize.
Ŝ
Time Interval
: Define how frequently NTP queries the server (in seconds).
