33
main menu and press [home] button, NOISE
REDUCTION menu appears, as shown in the
following figure.
NR2D-Level: 2D noise reduction. Optional
items: Off, Auto, 1 ~ 5
NR3D-Level: 3D noise reduction. Optional
items: Off, 1 ~ 8
D-HotPixel:
Dynamic bad points
, Optional
items: Off, 1 ~ 5
7. SETUP
Move the cursor to the Setup item in the main menu
and press [home] button, SETUP menu
appears, as shown in the following figure.
Language: menu language, Optional items: EN,
Chinese
Protocol: Control protocol type. Optional items:
AUTO, VISCA, PELCO-D, PELCO-P
V_Address: Protocol address, To be decided
according to the agreement, AUTO, VISCA protocol
Optional items: 1 ~ 7
P_D_Address: PELCO-D protocol Optional
items: 0 ~ 254
P_P_Address: PELCO-P protocol Optional
items: 0 ~ 31
V_AddrFix: If I can change through the serial port of
infrared switch, Optional items: On, Off
(
When set to On,
useless in 88 30 01 FF Command
)
Net Mode: Set the serial port control networking,
Optional items: Serial, Paral
SETUP
Language
EN
Protocol
VISCA
V_Address
1
V_AddrFix
Off
Net Mode
Serial
Baudrate
9600
Select Item
Change Value
[Menu] Back
NOISE REDUCTION
NR2D-Level 3
NR3D-Level 3
D-HotPixel
Off
Select Item
Change Value
[Menu] Back