4K Presentation Switcher with Soft Codec & Matrix Outputs
7
3.1.2 Rear Panel
①
INPUT:
VIDEO:
2x HDMI IN, 1x DP IN and 1x USB-C IN port.
②
OUTPUT
HDMI:
HDMI video output port.
HDBT:
Support to be powered by 24V PoC by the receiver.
Connect with HDBaseT Receiver to transmit AV signal, RS232 control signal.
③
CONTROL
PC1&PC2:
Two Type-B USB ports, provides three di
ff
erent USB modes: Follow
Video, Follow USB, and Manual.
DEVICE 1& DEVICE 2:
Two Type-A USB ports, connect with USB devices.
RS232:
Serial port, 3-pin terminal connector, connect with a control device (such
as PC).
TCP/IP:
RJ45 connector, provides built-in Web-GUI and TCP/IP control.
FIRMWARE:
Type-A USB port for updating system firmware.
④
DC 24V:
DC barrel connector for connecting the included power adapter.
Note 1:
Only when Transmitter powered by local, it can provide power 40W with
Type-C. If Transmitter powered by the far-end, it can not provide power with USB-C.
Note 2:
Transmitter DC 24V only powers to Type-C port, not powers to itself.
DC 24V
INPUT
OUTPUT
CONTROL
RS232
Tx
Rx
PC 1
FIRMWARE
PC 2
DEVICE 2
DEVICE 1
HDMI
HDBT
TCP/IP
2. HDMI IN
4. USB-C IN
1. HDMI IN
3. DP IN
1
1
2
3
4
