manualshive.com logo in svg

PTN MUH66TP-N, User Manual

Share
Download
PTN MUH66TP-N User Manual Download Page 6

4K HDBaseT 6x6 Matrix Switcher                                                               

 

PTN Electronics Limited                            1                          www.PTN-electronics.com 

1. Introduction 

1.1 Introduction to the MUH66TP-N 

MUH66TP-N is a professional 6x6 HDBaseT Matrix Switcher that accommodates 6 
HDMI IN (4k signal at max), 6 auxiliary audio IN, 6 IR IN. 

Select HDMI input by front panel buttons, IR, RS232, or GUI. The selected source is 
delivered to HDMI Output 1~3 (for HDMI input 1~3) & HDBaseT outputs 1~6 (easy 
extension to 70m at 1080p and 40m at 4Kx2K on a single CAT5e/6 connection with 
HDBaseT receivers, with PoC) simultaneously. The unit also supports EDID 
management and HDCP. 

Except embedded HDMI audio, MUH66TP-N provides 6 auxiliary audio outputs. Audio 
source is selectable via RS232 command. Selected audio is output via HDMI outputs& 
HDBaseT outputs and the audio output sockets. 

The unit also supports bi-directional RS232& IR control. 

1.2 Features 

  Support HDMI 1.4, 4Kx2K& 1080p 3D 

  HDCP1.4 compatible, support manual HDCP management and auto-detecting   

  Transmit 4Kx2K signal for 8m via HDMI port, 40m via HDBT port 

  Audio source selectable via RS232 command 

  6 HDBaseT outputs, for easy extension to 70m at 1080p and 40m at 4Kx2K on a 

single CAT5e/6 cable 

  Support PoC 

  LCD screen shows real-time I/O connection status, switching status, HDCP status, 

and output resolution. 

  Controllable via front panel, RS232, IR and TCP/IP 

  Support bi-directional IR& RS232 control 

  Built-in GUI for TCP/IP control 

  Powerful EDID management 

  Support off memory for reliable operation 

  Support firmware upgrade through Micro USB port 

  Easy installation with rack-mounting design 

1.3 Package List 

  1 x MUH66TP-N 

  2 x Mounting ears (6 x Screws) 

Summary of Contents for MUH66TP-N













































Reviews:

No comments

Brands by name

Popular brands

Load more brands