PTN MUH44E KIT, User Manual

Page: 22 / 40

MUH44E Kit 4K Home Distribution Hub
PTN Electronics Limited 17 www.PTN-electronics.com
Command Function
Feedback
Example

X=5, enable all the 4 ports.
DigitAudioOFF[x].
Disable HDMI audio output of port x.

X=1, 2, 3, 4, disable this port.

X=5, disable all the 4 ports.
DigitAudio OFF
with [x]
/+[Y]/[X]:******.
Set communication between PC and
HDBaseT receiver.
①
Y is for RS232 port (connect with
RS232 port of HDBaseT receiver)
Y= 1~5 or A~H, The value of Y is
defined into the following meanings
(in a given baud rate depended by
the value of X):
a. Y = 1~4, send this command to the
corresponding HDBaseT receiver to
control far-end device.
b. Y = 5, send this command to all
HDBaseT receivers to control all far-
end devices.
c. Y = A, B, C, or D
d. Y = E, F, G, or H
For items c or d, send this
command, it will be saved to the
matrix switcher but taken without
action to corresponding HDBaseT
receiver. And its command function
will be effective almost at the same
time when you send the command
PWON (for item c) or PWOFF (for
item d).
Note:
A & E are for port 1. B & F are for
port 2.
C & G are for port 3. D & H are for
port 4.
②
X is for baud rate, its value ranges
from 1 to 7 (1--2400, 2--4800, 3--
9600, 4--19200, 5--38400, 6
—
57600, 7--115200)
③
***** is for data (max 48 Byte)
******