MUH44E Kit 4K Home Distribution Hub
PTN Electronics Limited
10
www.PTN-electronics.com
1) To convert one input to an output:
Example: Input 1 to Output 3
→ Press INPUTS 1 + OUTPUTS 3 + ENTER
NOTE:
Default status, on first boot up this matrix assigns the IR outputs to the
corresponding HDMI input, meaning, IR out 1 is directly associated to HDMI
input 1 and so on. When you switch an HDMI input to a different output, the
corresponding IR OUT will be switched synchronously to allow the IR
commands to be sent from the select zone back through the Matrix
Switcher to the source.
2) To convert an input to several outputs:
Example: Convert Input 2 to Output 3 and 4
→ Press INPUTS 2 + OUTPUTS 3 + OUTPUTS 4 + ENTER
3) To convert an input to all outputs:
Example: Input 1 to all Outputs
→ Press INPUTS 1 + ALL + ENTER
By using IR & HDBaseT transmission technology, the MUH44E KIT has some functions
as follows:
1)
Control far-end output device from local.
2)
Control local input/output device remotely.
3)
Control the Matrix Switcher locally/remotely.
Force Carrier
a)
Only if the IR receiver connected to HDBaseT receiver is with IR carrier, can the
received IR signal be transferred to IR OUT port of the Matrix Switcher.
b)
Only if the IR receiver connected to the Matrix Switcher is with IR carrier, can the
received IR signal be transferred to IR OUT port of the Matrix Switcher.
If the IR receiver connected to HDBaseT receiver or the Matrix Switcher is without
an IR carrier signal, send the command “%0901.” to enter infrared carrier enforcing
mode, and then IR signal can be transferred to IR OUT port.
Summary of Contents for MUH44E KIT
Page 39: ......
