SDI to HDMI Converter
PTN Electronics Limited www.PTN-electronics.com
3
HDMI: The LED turns green when output HDMI signal, and turns off when output DVI
signal.
3G: Turns on when detects a 3G high definition signal.
HD: Turns on when detects a HD signal.
SD: Turns on when detects a SD signal.
3. System Connection
3.1. System Diagram
Figure 2
System Diagram
3.2. Connection Procedure
Please reference to the system diagram before your system installation. A detailed
installation procedure is showed as follows.
Step1.
Connect the input SDI signal (such as SDI camera) to the
SDI IN
port on the rear
panel of CSH2 by using a SDI cable.
If you need two outputs, please connect the
SDI LOOP
port on the rear panel of
this CSH2 to the
SDI IN
port on another CSH2 by using another SDI cable.
Step2.
If long distance audio transmission is requested, please connect the
DIGITAL
AUDIO
output port to the optic-fiber accepter (SPDIF decoding included) by
using an optical fiber.
Step3.
Use an audio cable to connect the
L
&
R
of the
AUDIO OUT
port with audio
device to output analog audio.
Step4.
Use a HDMI cable to connect
HDMI OUT
port of CSH2 converter with a display
device to output the HDMI signal.
