PT WS1V Series Setup Manual Download Page 4 | Manualshive

Page: 4 / 24

PT WS1V Series Setup Manual Download Page 4

WS1V Set Up Manual Rev. 7.8.30gll

2 BEFORE USING THE SCALE

Thank you for purchasing a PT Electronic Digital Scale. In order to use the scale
properly, please read this Set Up Manual carefully before use. If you have a
problem concerning the scale, please contact your supplier.

1. Please keep scale in a cool and dry place. Do not store at high temperatures.

2. Do not allow any liquids to come into or contact with the scale. If this happens, wipe the

scale dry with a cloth.

3. Avoid objects impacting with the scale. Do not drop loads onto the scale or subject the

weigh pan to any strong shock loads.

4. The load placed on the weigh pan must not exceed the maximum weighing capacity of the

scale.

5. If the scale is not going to be used for some time, please clean it and store it in a plastic

bag in dry conditions. A desiccant sachet may be included to prevent moisture build up.

6. Do not mix different types of dry battery or mix used dry batteries with new dry batteries.

Page 2

«
...
2
3
4
5
6
...
»

Summary of Contents for WS1V Series

























Reviews:

No comments