PSV groupe DRC - H22, User Manual

Page: 9 / 22

4.2 Mouting plates and knives
NOTE :
Disconnect the machine from the electricity grid
for the following:
4.2.1 SYSTEM 2 CUTTING ELEMENTS (enterprise).
A- Insert the helix (2) inside the body (1) with a slight twisting
motion for a good engagement with the hex output shaft engine.
B-Fit Knife (3).
C-Mount Plate (4).
D-mount stainless steel nut (5).
VERY IMPORTANT :

It is essential to follow the order of assembly.

Do not mount the entire body / propeller and
cutting system at once.

Installation should be done as described above in
several phases.
6