W W W . P S S O . D E
28
Stereo Operation
In stereo mode, both channels are operated independently of each other. The highest output power during
stereo operation is achieved by connecting 4
Ω
speakers. With 8
Ω
speakers the output power will be slightly
reduced. For stereo operation, use either both Speaker pairs or the pairs of screw connectors.
Parallel Operation
In parallel mode, the input signal is internally switched from channel 1 additionally to channel 2. A signal at
the input of channel 2 is ignored. The volume is separately adjusted for both outputs. This way, PA
amplification can provided e.g. for two rooms using the same mono signal while adjusting the volume
independently. For parallel operation, use either both Speaker pairs or the pairs of screw connectors.
