Psion Teklogix Vehicle-Mount Computer 8515 User Manual Download

Page: 71 / 190

Chapter 4: Windows Embedded CE 5.0

Using a Dialog Box

Psion Teklogix 8515 Vehicle-Mount Computer User Manual

Warm Reset

The

Warm Reset

option resets the 8515, leaving all saved files and (registry) settings intact.

Any unsaved data is lost.

Cold Reset

The

Cold Reset

option resets the 8515. Any files not stored in permanent memory are lost.

However, the registry settings are saved.

4.5

Using a Dialog Box

A dialog box (like those in the sample screens in Figure 4.14 on page 45) appears when you
need to make selections and enter further information.

Figure 4.14 Navigating Dialog Boxes

Note:

A dialog box item that is displayed in grey text indicates that it is not

currently available.

Checkbox

Dropdown Menu

Button

Textbox

Radio Button

Tabs

Summary of Contents for Vehicle-Mount Computer 8515































































































































































































Search results

Summary of Contents for Vehicle-Mount Computer 8515

Reviews:

Related manuals for Vehicle-Mount Computer 8515

Brands by name

Popular brands

Psion Teklogix Vehicle-Mount Computer 8515, User Manual

Search results

Summary of Contents for Vehicle-Mount Computer 8515

Reviews:

Related manuals for Vehicle-Mount Computer 8515

Brands by name

Popular brands