manualshive.com logo in svg

Psion Teklogix NEO PX750, User Manual

Share
Download
Psion Teklogix NEO PX750 User Manual Download Page 134

Chapter 5: Configuration

Restoring A Profile

122

Psion Teklogix NEO Hand-Held Computer User Manual

Perform The Operation

•

Choose the 

Backup 

button to start the process, and create a profile.

5.7.2

Restoring A Profile

To manually restore a profile:
•

Choose 

Restore Selected Profile

 from the drop-down menu, and choose the 

Profile 

Name

 displayed in the drop-down menu. 

5.8

The Storage Manager

The 

Storage Manager

 allows the user to view information about the microSD card present 

in NEO.

5.8.1

Formatting A Memory Card

Formatting a memory card bulk-erases it. Once a card is erased, partitions may be created in 
it, much like those on a hard drive. Memory-card devices are normally ‘mounted’ (made 
available to the system) automatically when they are inserted. They must be dismounted 
before they can be formatted.
To format an entire memory card:
1. Choose 

Start> Settings>Control Panel

. 

Note: You can also manually restore an auto restore profile located in flash or a 

storage device.

Summary of Contents for NEO PX750















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands