2
SAFETY INSTRUCTIONS
1. Read and understand this instruction manual.
2. NEVER connect plug to power source until all the assembly steps have been completed.
3. Check that your supply voltage and grounding are correct.
4. Do not use the lathe in a damp or wet location.
5. Keep lathe clean and lightly oiled.
6. Make sure the belt, pulley, and control box are adequately guarded at all times.
7. Always remove tools, chuck keys, toggle bars, etc. When you are finished with them.
8. Keep the work area well lit and adequate ventilation in the workspace.
9. Keep young children and bystanders a safe distance from the lathe.
10. Do not force the lathe to do more than it is designed to do.
11. Do not wear loose clothing, jewelry or neckties, which could get caught in revolving parts. It is recommended that
long hair be restrained.
12. Safety eye wear should be worn at all times. Also, it is recommended to use a face or dust mask during lathe
operation.
13. Attach all work pieces securely to the lathe, whether between centers, on faceplates, or in chucks, etc.
14. For best results be sure to keep turning tools sharp, clean, and free from rust.
15. Use only three wire extension cords that have 3-prong grounding type plugs and 3-hole receptacles that except
the tool’s plug.
16. Check the speed BEFORE mounting any material onto the lathe. ALWAYS start the lathe at its slowest speed.
17. Always use an appropriate speed for the projects being turned - Slow speeds for larger bowls, faster speeds for
smaller spindles.
18. Keep the door to the pulleys and belts securely screwed closed during lathe operation.
19. Always check that the index/spindle lock knob is disengaged prior to turning on the lathe.
20. Vacuum excess dust build-up that may accumulate in or near the variable speed control box.
WARRANTY
The Turncrafter Commander Lathes are warranted against defects in materials and workmanship for a period of three
(3) years from the date of purchase. This warranty applies to the purchaser of this product, and is limited to repair or
replacement of the product or it’s parts at PSI Woodworking Products’ discretion. Excluded are parts, which have been
misused, abused, altered, or consumed by normal operation of the machine. Also excluded are direct or consequential
damages to the persons, property, and/or materials. Your invoice serves as proof of purchase and must be referenced
prior to return authorization.
Contact your dealer where you purchased your lathe for service or repair issues.
Date Purchased
Invoice No.
