Bolt Action Pen Kit
PKCP80XX
PKCP80XX
PSI Woodworking Products
DIAGRAM A - Parts List
Required Accessories:
• 7 mm, pen mandrel
• Drill bit 3/8” #PKEXEC-38
• PKCP3000BU bushing set (2 pc)
• PKTRIMKIT barrel trimming set, use 3/8” shaft
• Live Tailstock Center
• 2 part epoxy glue or insta-cure (cyanoacrylate) glue
• Minimum Blank size: 5/8” x 2-1/4”
Preparing the Blank
• Cut one pen blank to the length of the brass tube (add 1/16” for trimming).
• Drill a 3/8” hole lengthwise through the blank.
• Spread the glue over the tube. Insert the tube into the blank with a twisting motion to spread the
glue evenly inside. Center the tube lengthwise in the blank.
• When the glue dries, Square the end of each blank. Use a Barrel trimmer with 3/8” shaft or a universal pen
blank squaring jig with a power disc sander. Take the wood down to the brass tube. Do not trim
beyond the length of the tube since this may interfere with operation of the mechanism and assembly.
Use the barrel trimmer shaft to clean the inside of the tube.
Kit Features:
• Easy to turn with single tube
• Minimum Parts to assemble
• Uses Parker® Style Refill
• Available Multiple finishes
• Overall length 5-1/4”
• Now with two Bolt positions
Front End
Tube / Barrel
Position A
Back End Assembly
Position B
Rotate Clip
Rotate Bolt
Threaded Nut
Spring
Refill
1-31/32”
Slot B
Slot A
Cap
Posi
tio
n A (a
s de
liv
er
ed)
Posi
tio
n B (S
ee a
ss
em
bl
y in
str
uc
tio
ns)
Left H
an
d C
onfigura
tio
n
US PATENT
#D682352S