PSI Woodworking Products MLCUTOFF User Manua Download Page 1

Page: 1 / 4

#MLCUTOFF

PSI Woodworking Products

WARRANTY

SPECIFICATIONS

Micro Pen Tube Cut Off Saw

User Manual

The Micro Tube Saw and Sizing Jig is engineered and manufactured to the highest standards of quality. You will fi nd this product an

essential accessory to your workshop. This saw is warranted against defects in material and workmanship for a period of two years

for all components. This warranty applies to the original purchaser of the product and is limited to the repair and/or

replacement of the product, or its parts at the discretion of PSI Woodworking Products. Excluded are parts which have been mis-

used, abused, altered, or consumed by normal operation of the saw. Also excluded are direct or consequential damages to persons,

properties, or materials. Your invoice serves as proof of purchase and must be referenced to authorize any warranty repair. Call your

PSI dealer for proper authorization.

• Power Source:

110VAC, 60HZ, .9AMP

• Blade:

HSS 2” dia, .020” Thick

• Max RPM:

7800, Arbor 3/8”

Read Manual before operating

• Copy any pen tube exact length

• Ideal for quickly cutting single or

multiple pen tubes

• Integrated ruler for sizing

Summary of Contents for MLCUTOFF

Page 1: ...product and is limited to the repair and or replacement of the product or its parts at the discretion of PSI Woodworking Products Excluded are parts which have been mis used abused altered or consumed...

Page 2: ...SERVICING or changing accessories 14 USE RECOMMENDED ACCESSORIES to avoid risk of injury 15 NEVER STAND ON TOOL 16 CHECK FOR DAMAGED PARTS Before use check for damage and determine if it may interfere...

Page 3: ...e to be turned over for full cuts and may not be as accurate ASSEMBLY To allow space for the Clamp to be attached Bolts should be inserted through Washer and into bottom of table B1 Slide Tube Holder...

Page 4: ...wer until Blade cuts completely through the tube into the slot in table Turn off and raise saw before attempting to retrieve the cut length To cut another matching tube Lower Flip Stop and release Tub...