5
TOOL RESTS (Figs. A and B)
The Bench Grinder is provided with two different Tool
Rests assemblies. The Left Side Tool Rest is grooved
to accept drill bits. The Right Side Tool Rest is entirely
flat.
1. Assemble the Tool Rest Supports (D,E) to the inside
surface of the Wheel Covers (S) with the flat and lock
washers (N) and knobs (M) as shown.
2. Assemble the Tool Rests (I,J) to the Supports (D,E)
with the flat washers (N) and Adjustment Knobs (M) as
shown. See Figure B.
3. Adjust each Tool Rest until its inside edge is 1/16”
from the grinding wheel. Firmly tighten the knobs hold-
ing the supports.
SPARK ARRESTORS (Fig. C)
1. Assemble the Spark Arrestors (G,H) to the front sur-
face of the Wheel Covers (S) with the flat washers and
pan head screws (K) as shown. See Figure C.
2. Adjust each Spark Arrestor until the lower edge is
1/16” from the grinding wheel. Firmly tighten the hex
head screws.
ASSEMBLY INSTRUCTIONS
WORK LIGHT
The Bench Grinder is provided with a Flexible Work Light (U)
to assist in visibility of the workpiece. Accepts 40watt bulb
PERMANENT MOUNTING
Use the mounting pads on the base of the grinder to
firmly attach grinder to a solid work surface (hardware not
included).
Fig. B
Fig. C - Spark Arrestors
Fig. D - Eye Sheilds
Fig. A
EYESHIELDS (Fig. D)
1. Assemble the eyeshield (A,B) to the mounted Spark Ar-
restors (G,H) inserting carriage head screw (F) through the
Spark Arrestor and the Eyeshield as shown.
2. Assemble the flat washer (N) and Lock Knob (L) to the
carriage head screw and tighten until the Eyeshield remains
in the desired position.
S
M
D
N
S
L
N
A
F
H
K
M
N
J
H
H